The installation method of rubber corner protector is basically as follows:

　　(1) Data preparation

　　Before the installation, the necessary things and installation data should be prepared in order to successfully complete the installation operation. Among them, the things required for the rubber angle protection device include impact drills, screwdrivers, self-tapping screws, hammers, swelled plastics, etc. The device data is a qualified rubber angle protection.

　　(2) punch

　　 Before punching, the exact punching position must be marked in the area where the rubber corner of the device needs to be installed. In addition, the number of holes has a certain relationship with the length of the rubber corner guard. The direction of the holes should be left and right, and the balance should be maintained to prevent tilt problems during the installation.

　　 When drilling, use a percussion drill to drill in an accurate direction. The hole must have a certain depth, but not too deep.

　　(3) Device rubber corner protector

　　After the punching process is completed, the swollen plastic is put into the hole and used for the screw device. Then, place the rubber corner protector in the corresponding position, use a screwdriver to fix the active screw to the placed rubber corner protector, and then use a hammer to knock the screw firmly. Make sure that each hole should be equipped with screws to prevent the rubber corners from loosening, tilting, falling off and other problems.

　　 (4) check

　　After the installation is completed, carefully check whether each rubber corner protector is firmly installed on the wall, whether there are missing holes, and whether the rubber corner protector has quality problems.

　　The price range of rubber corner guards currently on the market is:

　　The main manufacturing material of rubber corner protector is rubber, so its price is not very high. However, its price also has certain ties with manufacturers, raw materials, standards, and quantity purchased. If the size is 60cm*7cm*6mm, the price of rubber corner protectors is 5 yuan/piece, and the rubber corners with a length of less than 1.2 meters and a weight of less than 2kg are generally less than 15 yuan each; while the length is 1.5 meters and the weight is 4kg The price of the above rubber corner guards is generally between 35 yuan and 45 yuan each.

Dongying Zhenhua Traffic Engineering Co., Ltd. is mainly engaged in rubber corner protectors, wheel stoppers and water stoppers. With the business philosophy of "emphasizing credibility, building image, seeking quality, and promoting development" as its motto, it uses production, technical guidance and sales And perfect series of services have won the market, and at the same time, with high-quality products, high-quality reputation and high-quality services, they have won the high trust of users. Welcome to inquire.